Instrument Panel - RHD - Air Wave Duct - Left (Remove and Install)
Correction code
1405031101
FRT
0.24
NOTE: Unless
otherwise explicitly stated in the procedure, the above correction code and
FRT reflect all of the work required to perform this procedure, including
the linked procedures. Do
not stack correction codes unless explicitly told to do so.
NOTE: See Flat Rate Times to learn more about FRTs and how they are
created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com.
NOTE: See Personal Protection to make
sure wearing proper PPE when performing the below procedure.
Remove
- Remove the glove box. See Instrument Panel - Glove Box Assembly- RHD (Remove and Replace).
- Remove the passenger footwell duct. See Instrument Panel - Driver Footwell Duct - RHD (Remove and Replace).
-
Disconnect the instrument panel
passenger air wave duct thermistor connector.
-
Remove the clips (x2) to remove the
instrument panel passenger air wave duct from the HVAC module.
Install
-
Install the clips (x2) to secure the
passenger instrument panel air wave duct to the HVAC module.
-
Connect the passenger instrument panel
air wave duct thermistor connector.
- Install the passenger footwell duct. See Instrument Panel - Driver Footwell Duct - RHD (Remove and Replace).
- Install the glove box. See Instrument Panel - Glove Box Assembly- RHD (Remove and Replace).