2025-01-21

Liftgate Wedge Damper - LH (Remove and Replace)

Correction code NEW FRT 0.05 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.

Remove

  1. Open the liftgate.
  2. Remove LH wedge damper from liftgate.
    Informational PurposesAn informational icon, calling your attention
    Note
    Rotate counterclockwise 90 degrees.

Install

  1. Install LH wedge damper to liftgate.
    Informational PurposesAn informational icon, calling your attention
    Note
    Rotate clockwise 90 degrees .
  2. Close the liftgate.
  3. Verify correct liftgate to rear fascia assembly flush per Toolbox article 8199800.