2025-01-20

Gateway Configuration (Display and Change)

Display and Change Gateway Configuration

  1. Open the LH front door and lower the LH front window.
  2. Locally connect a laptop with Toolbox 3 to the vehicle. See Toolbox 3 (Connect and Disconnect).
  3. Enter the Vehicle Configuration tab.
    Informational PurposesAn informational icon, calling your attention
    Note
    The computer should automatically enter the Vehicle Configuration tab after connecting. If no configuration parameter displays, click the Refresh Configs button at the bottom left of the screen to refresh the page.
  4. Scroll down the list to find the parameter and its current value.
    Informational PurposesAn informational icon, calling your attention
    Note
    Black parameters on the right side are editable. Grey parameters are non-editable.
  5. Click on the current value, and from the drop-down menu that appears, select the new value.
    Informational PurposesAn informational icon, calling your attention
    Note
    Once the new value is selected, the parameter background becomes orange.
  6. Click the Apply Changes button in the lower right corner.
  7. In the new window that opens, click Run to apply the changes and reboot the gateway.
  8. The progress is shown, and after reboot, the window indicates a successful update to the vehicle configuration.
  9. If another service procedure requested verification or modification of a gateway configuration parameter, return to that procedure now. Otherwise, continue to the next step.
  10. Disconnect the laptop with Toolbox 3 from the vehicle. See Toolbox 3 (Connect and Disconnect).
  11. On the touchscreen, press and hold the Exit Service Mode button to exit Service Mode Plus.
  12. Raise the LH front window and close the LH front door.