Exterior Mirror Premium - Glass - LH (Remove and Replace)
Correction code
1209010502
FRT
0.06
NOTE: Unless
otherwise explicitly stated in the procedure, the correction code and FRT
listed above reflect all of the work required to perform this procedure,
including the linked procedures. Do not stack correction
codes unless explicitly told to do so.
NOTE: See Flat Rate Times
to learn more about FRTs and how they are created.
NOTE: See Personal Protection
to make sure you are wearing proper PPE when performing the procedure
below.
NOTE:
See Ergonomic Precautions for
safe and healthy working practices.
Remove
-
Press the outside of the door mirror glass fully in so that it is angled away from the vehicle.
-
Insert a plastic trim tool
behind the glass in the bottom inboard corner, and then carefully release
the tabs (x8) that attach the door mirror glass to the mirror
assembly.
-
Use a paint pen to mark the upper black harness connector.
NoteThe paint marking is used to aid installation.
-
Disconnect the electrical connectors (x3) from the door mirror glass.
-
Remove the door mirror glass from the vehicle.
Install
-
Connect the electrical connectors (x3) to the door mirror glass.
NoteRefer to the paint marking made during removal to determine which electrical connector is the upper one.
-
Align the center of the door
mirror glass to the center of the door mirror assembly and then install the
door mirror glass so that the tabs (x8) are fully engaged.
NoteWhen aligned correctly, the metal tab on the door mirror glass goes the top right of the door mirror assembly.CAUTIONTake care not to damage component(s).
- Adjust the door mirror glass back to its original location.
- Clean the door mirror glass to remove any smudges or fingerprints.