2025-09-11

Foam - Seat Back - 3rd Row - LH (Model YL) (Remove and Replace)

Correction code 13090100702 FRT 1.32 NOTE: Unless otherwise explicitly stated in the procedure, the correction code and FRT listed above reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. NOTE: See Personal Protection to make sure you are wearing proper PPE when performing the procedure below. NOTE: See Ergonomic Precautions for safe and healthy working practices.

Informational PurposesAn informational icon, calling your attention
Note
The heat pad cannot be reused once separated from the foam. Order the seat back heat pad together with the foam.

Remove

  1. Remove the 3rd row LH seat back shell. See Shell - Seat Back - 3rd Row - LH (Model YL) (Remove and Replace).
  2. Remove the 3rd row LH seat back trim from the seat back foam.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    Warning
    The airbag is configured/folded in a specific manner and will need to be replaced if it is dropped, altered or manipulated in any way.
    Informational PurposesAn informational icon, calling your attention
    Note
    The trim cover is held to the cushion by Velcro. Gently pull the trim inch by inch. Start from the lower seat back and work upward. Ensure the Velcro does not tear off the cushion.

Install

  1. Install the new seat back heat pad to the new seat back foam.
    Informational PurposesAn informational icon, calling your attention
    Note
    Ensure the heat pad is properly adhered in place.
  2. Install the 3rd row LH seat back trim to the seat back foam.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    Warning
    The airbag is configured/folded in a specific manner and will need to be replaced if it is dropped, altered or manipulated in any way.
    Informational PurposesAn informational icon, calling your attention
    Note
    Starting from the upper seat back and working downward, gently press the seat back trim to attach the Velcro. Route the strap through the foam center.
  3. Install the 3rd row LH seat back shell. See Shell - Seat Back - 3rd Row - LH (Model YL) (Remove and Replace).