INSTRUMENT PANEL - DRIVER FOOTWELL DUCT (Remove and Replace)
Correction code
1405030102
FRT
0.12
NOTE: Unless
otherwise explicitly stated in the procedure, the above correction code and
FRT reflect all of the work required to perform this procedure, including
the linked procedures. Do
not stack correction codes unless explicitly told to do so.
NOTE: See Flat Rate Times to learn more about FRTs and how they are
created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com.
NOTE: See Personal Protection to make
sure wearing proper PPE when performing the below procedure.
Remove
- Remove the driver footwell hush panel. See INSTRUMENT PANEL - DRIVER FOOTWELL CLOSEOUT (Remove and Replace).
- Release the clip, and then pull the LH footwell duct towards the LH side of the vehicle to remove it from the HVAC module.
Install
- Install the LH footwell duct to the HVAC module and secure the clip.
- Install the driver footwell hush panel. See INSTRUMENT PANEL - DRIVER FOOTWELL CLOSEOUT (Remove and Replace).