Underhood Apron - Rear (Remove and Replace)
Correction code
1225010302
FRT
0.06
NOTE: Unless
otherwise explicitly stated in the procedure, the above correction code and
FRT reflect all of the work required to perform this procedure, including
the linked procedures. Do
not stack correction codes unless explicitly told to do so.
NOTE: See Flat Rate Times to learn more about FRTs and how they are
created. To provide feedback on FRT values, email ServiceManualFeedback@tesla.com.
NOTE: See Personal Protection to make
sure wearing proper PPE when performing the below procedure.NOTE:
See Ergonomic Precautionsfor safe
and healthy working practices.
Remove
- Open the hood.
-
Use the clip pry tool to release the
clips that attach the rear underhood apron to the vehicle, and then remove the apron
from the vehicle.
Install
-
Install the clips that attach the rear
underhood apron to the vehicle, and then install the apron to the vehicle.
- Close the hood.