2025-04-13

Instrument Panel - Passanger Footwell - RHD (Remove and Replace)

Correction code 1405020502 FRT 0.05 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.

Remove

  1. Open the LH front door and lower the LH front window.
  2. Move the LH front seat backward.
  3. Release the magnets (x2) and the datums (x2) that attach the LH cabin carpet cover to the passenger footwell cover.
  4. Release the clips that attach the passenger footwell cover to the vehicle, disconnect the electrical connector, and then remove the passenger footwell cover from the vehicle.

Install

  1. Connect the electrical connector, and then install the clips that attach the passenger footwell cover to the vehicle.
  2. Install the magnets (x2) and the datums (x2) that attach the LH cabin carpet cover to the passenger footwell cover.
    Informational PurposesAn informational icon, calling your attention
    Note
    Align the air vent with the grill.
  3. Move the LH front seat back to its original position.
  4. Raise the LH front window and close the LH front door.