Fan And Shroud (Remove and Replace)
Correction code
1830010202
FRT
1
NOTE: Unless
otherwise explicitly stated in the procedure, the above correction code and
FRT reflect all of the work required to perform this procedure, including
the linked procedures. Do
not stack correction codes unless explicitly told to do so.
NOTE: See Flat Rate Times to learn more about FRTs and how they are
created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com.
NOTE: See Personal Protection to make
sure wearing proper PPE when performing the below procedure.
Remove
- Remove the fan and shroud assembly from the cooling fan module. See Radiator (Remove and Replace).
Install
- Install the fan and shroud assembly to the cooling fan module. See Radiator (Remove and Replace).