Angle Adjuster Cover - 3rd Row - LH (Model YL) (Remove and Replace)
Correction code
13090101202
FRT
0.18
NOTE: Unless
otherwise explicitly stated in the procedure, the correction code and its
associated FRT reflect all of the work required to perform this procedure,
including the linked procedures. Do not stack correction
codes unless explicitly told to do so.
NOTE: See Flat Rate Times to
learn more about FRTs and how they are created.
NOTE: See Personal Protection to make
sure you are wearing proper PPE when performing the procedure below.
NOTE: See Ergonomic Precautions for safe and healthy
working practices.
Remove
- Remove the 3rd row LH seat cushion bolster. See Bolster - Seat Cushion - 3rd Row - LH (Model YL) (Remove and Replace).
-
Lift the 3rd row LH seat angle adjuster cover up, and then pull it forward to release
the tabs (x3) that attach it to the inner B-cover.
Install
-
Insert the 3rd row LH seat angle adjuster cover backwards, confirm the alignment of
the position, and then press it downward to secure the tabs (x3) that attach the
adjuster cover to the inner B-cover.
- Install the 3rd row LH seat cushion bolster. See Bolster - Seat Cushion - 3rd Row - LH (Model YL) (Remove and Replace).