Armrest Hinge Assembly - Center Console (Model YL) (Remove and Replace)
Correction code
15190201002
FRT
0.72
NOTE: Unless
otherwise explicitly stated in the procedure, the correction code and its
associated FRT reflect all of the work required to perform this procedure,
including the linked procedures. Do not stack correction
codes unless explicitly told to do so.
NOTE: See Flat Rate Times to
learn more about FRTs and how they are created.
NOTE: See Personal Protection to make
sure you are wearing proper PPE when performing the procedure below.
NOTE: See Ergonomic Precautions for safe and healthy
working practices.
Torque Specifications
| Description | Torque Value | Recommended Tools | Reuse/Replace | Notes |
|---|---|---|---|---|
| Screws (x4) that attach the hinge assembly to the armrest outer assembly |
 1.2 Nm (.9 lbs-ft) |
|
Reuse |
Remove
-
Remove the rear end module. See Rear End Module - Center Console (Model YL) (Remove and Install).
NoteDuring removal, certain steps require extra care. See the animation(s) for detailed guidance.
- Remove the armrest inner assembly. See Armrest - Inner - Center Console (Remove and Replace).
-
Remove the screws (x4) that attach the hinge assembly to the armrest outer
assembly.
TipUse of the following tool(s) is recommended:
- Torx T20 bit
- Digital Torque Screwdriver 0.10Nm - 2.0Nm
-
Remove the armrest hinge assembly from the datums (x4).
Install
-
Install the armrest hinge assembly to the datums (x4).
-
Install the screws (x4) that attach the hinge assembly to the armrest outer
assembly.1.2 Nm (.9 lbs-ft)TipUse of the following tool(s) is recommended:
- Torx T20 bit
- Digital Torque Screwdriver 0.10Nm - 2.0Nm
- Install the armrest inner assembly. See Armrest - Inner - Center Console (Remove and Replace).
- Install the rear end module. See Rear End Module - Center Console (Model YL) (Remove and Install).