COWL TOP INSULATOR (Remove and Replace)
Correction code
1530010102
FRT
1.15
NOTE: Unless
otherwise explicitly stated in the procedure, the above correction code and
FRT reflect all of the work required to perform this procedure, including
the linked procedures. Do
not stack correction codes unless explicitly told to do so.
NOTE: See Flat Rate Times to learn more about FRTs and how they are
created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com.
NOTE: See Personal Protection to make
sure wearing proper PPE when performing the below procedure.
Remove
-
With assistance, release the tabs and
remove the instrument panel upper carrier assembly from the vehicle. See Assembly - Instrument Panel - Upper (Remove and Replace).
NoteDo not separate the components from the upper carrier assembly. Just remove the assembly from the vehicle.
- Release the clips (x4) and remove the cowl top insulator.
Install
- Secure the cowl top insulator clips (x4).
- Install the instrument panel upper carrier to the vehicle. See Assembly - Instrument Panel - Upper (Remove and Replace).