Bracket - HV Harness - Ski - Bottom (Remove and Replace)
Correction code
4450010032
FRT
0.66
NOTE: Unless
otherwise explicitly stated in the procedure, the correction code and its
associated FRT reflect all of the work required to perform this procedure,
including the linked procedures. Do not stack correction
codes unless explicitly told to do so.
NOTE: See Flat Rate Times to
learn more about FRTs and how they are created.
NOTE: See Personal Protection to make
sure you are wearing proper PPE when performing the procedure below.
NOTE: See Ergonomic Precautions for safe and healthy
working practices.
Remove
- Remove the top ski bracket. See Bracket - HV Harness - Ski - Top (Remove and Replace).
-
Release the locating clips (x2) to remove the bottom ski bracket from the RDU (Rear
Drive Unit) side of the center ski.
Clip type Model Y Premium
Clip type Model Y Standard fitted with alternative HV battery
Clip type Model Y Standard fitted with alternative HV battery
Install
-
Where fitted: install 2 zip ties to the bracket and HV cables.
Clip type Model Y Standard fitted with alternative HV battery
-
Install the bottom ski bracket to the
RDU side of the center ski by attaching the lo0cating clips (X2).
Clip type Model Y Premium
Clip type Model Y Standard fitted with alternative HV battery
- Install the top ski bracket. See Bracket - HV Harness - Ski - Top (Remove and Replace).