2026-04-20

Correction code 1530040201 1530040202 FRT NOTE: Unless otherwise explicitly stated in the procedure, the correction code and FRT listed above reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. NOTE: See Personal Protection to make sure you are wearing proper PPE when performing the procedure below. NOTE: See Ergonomic Precautions for safe and healthy working practices.

  • 2026-02-04: Released new procedure.

Remove

  1. Remove the LH 2nd row seat. See Seat Assembly - 2nd Row - LH (7-Seat) (Remove and Replace).
  2. Remove the RH 2nd row seat. See Seat Assembly - 2nd Row - RH (7-Seat) (Remove and Replace).
  3. Release the LH side of the 3rd row rear carpet from the vehicle.
    1. Release the location pins (x2) and clips (x2) that attach the LH side of the carpet to the vehicle.
    2. Lift the trim to access and remove the bolt that attaches the LH side of the carpet to the vehicle.
    Informational PurposesAn informational icon, calling your attention
    TIp
    Use of the following tool(s) is recommended:
    • Socket 3/8in Dr. 6pt. Std. x 11mm
  4. Release the RH side of the 3rd row rear carpet from the vehicle.
    1. Release the location pins (x2) and clips (x2) that attach the RH side of the carpet to the vehicle.
    2. Lift the trim to access and remove the bolt that attaches the RH side of the carpet to the vehicle.
    Informational PurposesAn informational icon, calling your attention
    TIp
    Use of the following tool(s) is recommended:
    • Socket 3/8in Dr. 6pt. Std. x 11mm
  5. Remove the 3rd row rear cabin carpet.

Install

  1. Position the 3rd row rear cabin carpet back to its original position.
  2. Secure the LH side of the 3rd row rear carpet onto the vehicle.
    1. Secure the location pins (x2) and clips (x2) that attach the LH side of the carpet to the vehicle.
    2. Lift the trim to access and install the bolt that attaches the LH side of the carpet to the vehicle.
    Informational PurposesAn informational icon, calling your attention
    TIp
    Use of the following tool(s) is recommended:
    • Socket 3/8in Dr. 6pt. Std. x 11mm
  3. Secure the RH side of the 3rd row rear carpet onto the vehicle.
    1. Secure the location pins (x2) and clips (x2) that attach the RH side of the carpet to the vehicle.
    2. Lift the trim to access and install the bolt that attaches the RH side of the carpet to the vehicle.
    Informational PurposesAn informational icon, calling your attention
    TIp
    Use of the following tool(s) is recommended:
    • Socket 3/8in Dr. 6pt. Std. x 11mm
  4. Install the LH 2nd row seat. See Seat Assembly - 2nd Row - LH (7-Seat) (Remove and Replace).
  5. Install the RH 2nd row seat. See Seat Assembly - 2nd Row - RH (7-Seat) (Remove and Replace).