2024-11-11

Fender Garnish - Front - LH (Remove and Replace)

Correction code 1220020102 0.06 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.

Remove

  1. Release the push clip at the front end of the fender garnish.
  2. Work from the front end to the rear end, release the clips (x11) and the tab that secure the fender garnish, and then remove the garnish from the vehicle.

Install

  1. Work from the rear end to the front end, install the clips (x11) and the tab that secure the fender garnish.
  2. Install the push clip at the front end of the fender garnish.