WHEELHOUSE INSULATOR - FRONT - RIGHT HAND (Remove and Replace)
Correction code
1530010602
FRT
0.20
NOTE: Unless
otherwise explicitly stated in the procedure, the above correction code and
FRT reflect all of the work required to perform this procedure, including
the linked procedures. Do
not stack correction codes unless explicitly told to do so.
NOTE: See Flat Rate Times to learn more about FRTs and how they are
created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com.
NOTE: See Personal Protection to make
sure wearing proper PPE when performing the below procedure.
Remove
- Remove the RH trunk side trim. See TRUNK SIDE TRIM LEFT HAND - REAR UNDER BODY (Remove and Replace).
-
Release the clips (x2) that attach the RH body harness to the body, and move it
aside.
-
Remove the RH front wheelhouse
insulator from the vehicle.
Install
-
Install the RH front wheelhouse insulator to the vehicle.
-
Install the clips (x2) that attach the RH body harness to the body.
- Install the trunk side trim. See TRUNK SIDE TRIM LEFT HAND - REAR UNDER BODY (Remove and Replace).