2024-11-10

Front Fascia Grille (Remove and Replace)

Correction code 1001040502 FRT 0.7 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.

Torque Specifications

Table 1. Torque Specifications: Front Fascia Grille (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Bolts (x2) that attach the front fascia camera to the front fascia grille
0.9 Nm (8 lbs-in)
  • Torx T20 socket
Reuse

Remove

  1. Remove the front fascia grille from the front fascia. See FRONT FASCIA (Remove and Replace).
  2. Remove the bolts (x2) that attach the front fascia camera to the front fascia grille, and then remove the camera from the grille.
    Informational PurposesAn informational icon, calling your attention
    TIp
    Use of the following tool(s) is recommended:
    • Torx T20 socket

Install

  1. Position the front fascia camera onto the front fascia grille, and then install the bolts (x2) that attach the front fascia camera to the front fascia grille.
    0.9 Nm (8 lbs-in)
    Informational PurposesAn informational icon, calling your attention
    TIp
    Use of the following tool(s) is recommended:
    • Torx T20 socket
  2. Install the front fascia grille to the front fascia. See FRONT FASCIA (Remove and Replace).