2026-01-30

B-Cover - Outer - Inboard - 2nd Row Seat - RH (7-Seat) (Remove and Replace)

Correction code 1308020701 1308020702 FRT 0.12 NOTE: Unless otherwise explicitly stated in the procedure, the correction code and FRT listed above reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. NOTE: See Personal Protection to make sure you are wearing proper PPE when performing the procedure below. NOTE: See Ergonomic Precautions for safe and healthy working practices.

Remove

  1. Open all four doors and lower all windows.
  2. Move the 1st row seats forward.
    Informational PurposesAn informational icon, calling your attention
    Note
    Adjust the seat back to avoid contact with the headliner if needed.
  3. Press the should switch and push the 2nd row LH and center seats forward to position the seats into the easy entry mode.
  4. Remove the 2nd row RH seat toe kick cover. See Cover - Toe Kick - 2nd Row - RH (7-Seat) (Remove and Replace).
  5. Release the clips (x4) that attach the RH 2nd row seat outer B-cover to the inner B-cover, and pull the cover away to remove it from the assembly.

Install

  1. Install the clips (x4) that attach the RH 2nd row seat outer B-cover from the inner B-cover.
  2. Install the 2nd row RH seat toe kick cover. See Cover - Toe Kick - 2nd Row - RH (7-Seat) (Remove and Replace).
  3. Move the 2nd row LH and center seats to their original positions.
  4. Move the 1st row LH seat to its original position.
  5. Move the 1st row RH seat to its original position.
  6. Raise all windows and close all doors.