Cover - Tow Hook - Rear Fascia (Remove and Replace)
Correction code
1001040402
FRT
0.05
NOTE: Unless
otherwise explicitly stated in the procedure, the above correction code and
FRT reflect all of the work required to perform this procedure, including
the linked procedures. Do
not stack correction codes unless explicitly told to do so.
NOTE: See Flat Rate Times to learn more about FRTs and how they are
created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com.
NOTE: See Personal Protection to make
sure wearing proper PPE when performing the below procedure.
Remove
-
Press the lower section of the tow hook cover to release the tabs that attach the
cover to the vehicle.
-
Gently pull the tow hook cover away from the vehicle to remove the retaining strap of
the cover, and then remove the cover from the vehicle.
Install
-
Insert the retaining strap into the slot located at the right corner of the opening,
and then insert the lower tab into the lower slot.
-
Press the upper section of the tow hook cover to install the tabs that attach the
cover to the vehicle.
