2025-03-12

REAR SPRING LOWER ISOLATOR (Remove and Replace)

Correction code 3115020702 FRT 0.00 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.

Install

  1. Install the LH rear suspension spring lower isolator to the spring.
    Informational PurposesAn informational icon, calling your attention
    Note
    Align the stop of the spring lower isolator to the end of the spring, as illustrated.
  2. Install the LH rear suspension spring. See REAR SPRING - REAR WHEEL DRIVE (Remove and Replace).