HV Battery System - HV Battery Electrical Components - Ancillary Bay - Hose - Outlet From Power Control Unit (Remove and Replace)
Correction code
1630011902
FRT 1.8
NOTE: Unless
otherwise explicitly stated in the procedure, the correction code and its
associated FRT reflect all of the work required to perform this procedure,
including the linked procedures. Do not stack correction
codes unless explicitly told to do so.
NOTE: See Flat Rate Times to
learn more about FRTs and how they are created.
NOTE: See Personal Protection to make
sure you are wearing proper PPE when performing the procedure below.
NOTE: See Ergonomic Precautions for safe and healthy
working practices.
Remove
- Remove the negative pack contactor from ancillary bay. See Pack Contactor - High Voltage - Negative (Remove and Replace).
-
Release PCS coolant inlet hose from
hose clip.
Install
-
Release PCS coolant inlet hose from hose clip.
- Install the negative pack contactor from ancillary bay. See Pack Contactor - High Voltage - Negative (Remove and Replace).