2025-06-16

Harness - Subframe - Rear (Remove and Replace)

Correction code 1710150012 FRT 0.96 NOTE: Unless otherwise explicitly stated in the procedure, the correction code and FRT listed above reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. NOTE: See Personal Protection to make sure you are wearing proper PPE when performing the procedure below. NOTE: See Ergonomic Precautions for safe and healthy working practices.

Remove

  1. Remove the rear subframe assembly from vehicle. See Rear Subframe (Remove and Replace).
  2. Release clips securing subframe harness to top of rear subframe.
  3. Release clips securing subframe harness to left and right of subframe.
  4. Remove harness from subframe assembly.
    Informational PurposesAn informational icon, calling your attention
    Note
    Release locking tab then push the handle downward to release connector.

Install

  1. Position harness onto subframe assembly.
    Informational PurposesAn informational icon, calling your attention
    Note
    Pass the new harness through the gap between subframe and body, and fix the harness onto the subframe, Taking care not to damage the harness.
  2. Install rear subframe harness into position and secure clips along left and right of subframe.
  3. Install clips securing subframe harness to top of rear subframe.
  4. Install the rear subframe assembly from vehicle. See Rear Subframe (Remove and Replace).