2026-08-09

Duct - Head - 3rd Row (Model YL) (Remove and Replace)

Correction code 18101600502 FRT 1.20 NOTE: Unless otherwise explicitly stated in the procedure, the correction code and its associated FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. NOTE: See Personal Protection to make sure you are wearing proper PPE when performing the procedure below. NOTE: See Ergonomic Precautions for safe and healthy working practices.

Remove

  1. Remove the 1st row podium. See 1st Row Podium (Model YL) (Remove and Replace).
    Note
    During removal, certain steps require extra care. See the animation(s) for detailed guidance.
  2. Remove the harness clip from the 3rd row head duct.
  3. Lift the rear section of the head duct upward and disconnect the front connection duct, and then disconnect the rear two connection ducts to remove the 3rd row head duct from the vehicle.

Install

  1. Align the location tab to the hole on the body, and then connect the rear two connection ducts, then install the front connection duct.
  2. Install the harness clip to the 3rd row head duct.
  3. Install the 1st row podium. See 1st Row Podium (Model YL) (Remove and Replace).