2025-09-11

Web Guide - Seatbelt - 1st Row - LH (Model YL) (Remove and Replace)

Correction code 20050300402 FRT 0.24 NOTE: Unless otherwise explicitly stated in the procedure, the correction code and FRT listed above reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. NOTE: See Personal Protection to make sure you are wearing proper PPE when performing the procedure below. NOTE: See Ergonomic Precautions for safe and healthy working practices.

Torque Specifications

Table 1. Torque Specifications: Web Guide - Seatbelt - 1st Row - LH (Model YL) (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Bolt that attach the LH 1st web guide to the vehicle
10 Nm (7.4 lbs-ft)
  • 10 mm socket
  • Ratchet/torque wrench
  • Torque Wrench 1/4in Dr. + Angle - 1076971-02-A (installation only)
Replace

Remove

  1. Release the LH B-pillar upper trim and move it aside. See Trim Assembly - B-Pillar - Upper - LH (Model YL) (Remove and Replace).
    Informational PurposesAn informational icon, calling your attention
    Note
    It is not necessary to release the seatbelt from the pretensioner.
  2. Remove and discard the LH front seat belt web guide.
    Informational PurposesAn informational icon, calling your attention
    Note
    The web guide will be supplied with bolt and gasket as an assembly.
    Informational PurposesAn informational icon, calling your attention
    TIp
    Use of the following tool(s) is recommended:
    • 10 mm socket
    • Ratchet/torque wrench
    • Torque Wrench 1/4in Dr. + Angle - 1076971-02-A (installation only)

Install

  1. Install a new LH front seat belt web guide.
    10 Nm (7.4 lbs-ft)
    Informational PurposesAn informational icon, calling your attention
    TIp
    Use of the following tool(s) is recommended:
    • 10 mm socket
    • Ratchet/torque wrench
    • Torque Wrench 1/4in Dr. + Angle - 1076971-02-A (installation only)
  2. Install the LH B-pillar upper trim. See Trim Assembly - B-Pillar - Upper - LH (Model YL) (Remove and Replace).