2025-05-08

Brake Rotor - Front - LH (Remove and Replace)

Correction code 3301011102 FRT 0.24 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email ServiceManualFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.

  • 2025-05-08: Added brake pad burnishing step to be performed after rotor replacement.
  • 1082171-00-A S-HOOK, BRAKE CALIPER (SET OF 2)
Informational PurposesAn informational icon, calling your attention
Note
For detailed brake specifications, see Brakes.

Torque Specifications

Table 1. Torque Specifications: Brake Rotor - Front - LH (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Bolt that attaches the LH front brake hose bracket to the LH front knuckle
5 Nm (3.7 lbs-ft)
  • Cordless Ratchet/Impact Driver
  • 4 in extension
  • 10 mm socket
  • Ratchet/torque wrench
 Reuse
Bolts (x2) that attach the LH front brake caliper to the LH front knuckle
94 Nm (69.3 lbs-ft)
  • Cordless Ratchet/Impact Driver
  • External Torx E18
  • Ratchet/torque wrench
 Replace 1088969-00-B

Remove

  1. Remove the LH front wheel. See Wheel Assembly (Remove and Install).
  2. Remove the bolt that attaches the LH front brake hose bracket to the LH front knuckle.
    Informational PurposesAn informational icon, calling your attention
    TIp
    Use of the following tool(s) is recommended:
    • Cordless Ratchet/Impact Driver
    • 4 in extension
    • 10 mm socket
    • Ratchet/torque wrench
  3. Remove and discard the bolts (x2) that attach the LH front brake caliper to the LH front knuckle, remove the caliper from the knuckle, and allow the caliper to hang from an S-hook.
    Informational PurposesAn informational icon, calling your attention
    TIp
    Use of the following tool(s) is recommended:
    • Cordless Ratchet/Impact Driver
    • External Torx E18
    • Ratchet/torque wrench
  4. Remove the LH front rotor from the vehicle.
    Informational PurposesAn informational icon, calling your attention
    Note
    Store the rotor face down to reduce likelihood of damage to the rotor face.

Install

  1. Install the LH front brake rotor onto the vehicle.
  2. Install new bolts (x2) that attach the LH front caliper to the LH front knuckle.
    94 Nm (69.3 lbs-ft)
    Informational PurposesAn informational icon, calling your attention
    Note
    Mark with a pen after installation.
    Informational PurposesAn informational icon, calling your attention
    TIp
    Use of the following tool(s) is recommended:
    • Cordless Ratchet/Impact Driver
    • External Torx E18
    • Ratchet/torque wrench
  3. Install the bolt that attaches the LH front brake hose bracket to the LH front knuckle.
    5 Nm (3.7 lbs-ft)
    Informational PurposesAn informational icon, calling your attention
    TIp
    Use of the following tool(s) is recommended:
    • Cordless Ratchet/Impact Driver
    • 4 in extension
    • 10 mm socket
    • Ratchet/torque wrench
  4. Install the LH front wheel. See Wheel Assembly (Remove and Install).
  5. Burnish the brakes. See Brake Pads - Burnishing.
    Informational PurposesAn informational icon, calling your attention
    Note
    During vehicle driving, make sure that proper brake pedal feel and performance is achieved.
    Informational PurposesAn informational icon, calling your attention
    Note
    Add the correction code for brake pad burnishing 33013000 as a separate activity to the Service Visit.