Cover - Toe Kick - 2nd Row - RH (7-Seat) (Remove and Replace)
Correction code
1308021101
1308021102
FRT
0.06
NOTE: Unless
otherwise explicitly stated in the procedure, the correction code and its
associated FRT reflect all of the work required to perform this procedure,
including the linked procedures. Do not stack correction
codes unless explicitly told to do so.
NOTE: See Flat Rate Times to
learn more about FRTs and how they are created.
NOTE: See Personal Protection to make
sure you are wearing proper PPE when performing the procedure below.
NOTE: See Ergonomic Precautions for safe and healthy
working practices.
Remove
- Open the RH front door.
-
Move the 1st row RH seat
forward.
NoteAdjust the seat back to avoid contact with the headliner if needed.
- Open the RH rear door.
-
Fold the 2nd row RH seatback down by
using seat switch or manual tether.
NoteProtect the seat back upholstery if necessary.
-
Pull up the towel bar and push the
seat forward.
-
Release the clips (x6) that attach the
2nd row RH seat toe kick cover to the seat assembly, and then remove the cover from the
vehicle.
Install
-
Install the clips (x6) that attach the
2nd row RH seat toe kick cover to the seat assembly.
-
Move the 2nd row RH seat to its
original position.
-
Move the 1st row RH seat to its
original position.
- Close the RH doors.