REAR POWERTRAIN RETURN (Remove and Replace)
Correction code
1830021402
FRT
0.00
NOTE: Unless
otherwise explicitly stated in the procedure, the above correction code and
FRT reflect all of the work required to perform this procedure, including
the linked procedures. Do
not stack correction codes unless explicitly told to do so.
NOTE: See Flat Rate Times to learn more about FRTs and how they are
created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com.
NOTE: See Personal Protection to make
sure wearing proper PPE when performing the below procedure.
Remove
- Remove the ancillary bay engagement seal from the HV battery pack. See HV Battery System - HV Battery Assembly - Ancillary Bay Engagement Seal.
- Remove the powertrain return tube from the RH side of the HV battery.
Install
- Install the powertrain return tube to the RH side of the HV battery.
- Install a new ancillary bay engagement seal to the HV battery pack. See HV Battery System - HV Battery Assembly - Ancillary Bay Engagement Seal.