2026-08-12

Rear Headliner (Remove and Replace)

Correction code 1520010502 FRT 0.06 NOTE: Unless otherwise explicitly stated in the procedure, the correction code and FRT listed above reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. NOTE: See Personal Protection to make sure you are wearing proper PPE when performing the procedure below. NOTE: See Ergonomic Precautions for safe and healthy working practices.

  • 2026-08-12: Added note to clarify that this procedure does not apply to US-built vehicles.
Note
This procedure does not apply to US-built vehicles. The headliner on US-built vehicles is only serviceable as a complete assembly.

Remove

  1. Release the clips (x6) and magnets (x2) that attach the rear headliner panel to the vehicle, and then remove the rear headliner panel.

Install

  1. Align the location pins (x3) to the holes, and then install the clips (x6) and magnets (x2) that attach the rear headliner panel to the vehicle.
    Note
    Replace any damaged clips.
    Note
    Ensure that the seal covers the interior trim panel.