2025-03-12

1st Row LH Seat Complete (Remove and Replace)

Correction code 1304010402 FRT 0.30 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.

Warning IconA warning icon, calling your attention to a possibly risky situation
Warning
Seat base edges are sharp and can cause personal injury. Wear cut resistant gloves when removing the seat from the vehicle, and while performing procedures that involve work on or near the seat base.

Install

  1. Install the driver seat. See 1st Row LH Seat Complete (Remove and Install).
  2. On the touchscreen, tap Controls > Service > Drivers seat, Steering & Mirrors Calibration > START, follow the instructions on the touchscreen, and allow the process to complete.
  3. Move the LH front seat to original position.
  4. Raise the LH front window and close the LH front door.