1ST ROW POWER LUMBAR SEATBACK - LEFT HAND (Remove and Replace)
Correction code
1301020202
FRT
0.35
NOTE: Unless
otherwise explicitly stated in the procedure, the above correction code and
FRT reflect all of the work required to perform this procedure, including
the linked procedures. Do
not stack correction codes unless explicitly told to do so.
NOTE: See Flat Rate Times to learn more about FRTs and how they are
created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com.
NOTE: See Personal Protection to make
sure wearing proper PPE when performing the below procedure.
Remove
- Remove the lumbar support. See 1ST ROW POWER LUMBAR SEATBACK - LEFT HAND (Remove and Install).
Install
- Install the lumbar support. See 1ST ROW POWER LUMBAR SEATBACK - LEFT HAND (Remove and Install).
- Reinstall the vehicle firmware. See Software Reinstall - Touchscreen.
- Raise the LH front window and close the LH front door.