2026-02-02
Closeout - Armrest - 2nd Row (Remove and Replace)
Correction code
1305030902
FRT
0.30
NOTE: Unless otherwise explicitly stated in the procedure, the correction code and FRT listed above reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so.
NOTE: See Flat Rate Times to learn more about FRTs and how they are created.
NOTE: See Personal Protection to make sure you
are wearing proper PPE when performing the procedure below.
NOTE: See Ergonomic Precautions for safe and healthy working practices.
- 2026-02-02: Added steps to remove armrest and lumbar bun.
Remove
- Remove the 2nd row armrest. See Armrest - 2nd Row (5-Seat) (Remove and Replace).
- Remove the 2nd row 20 lumbar bun. See Lumbar Bun - Center - 2nd Row (Remove and Replace).
- Remove the center seatback pivot clamps. See Pivot Clamp - Center Seatback - 2nd Row (5-Seat) (Remove and Replace).
-
Remove the 2nd row closeout assembly
from the 2nd row 20 seat frame.
-
Remove the clips (x5) that attach the
seatback closeout to the seat frame.
Install
-
Install the new clips (x5) that attach
the seatback closeout to the seat frame.
-
Install second row closeout assembly
from 2nd row 20 seat frame.
- Install the center seatback pivot clamps. See Pivot Clamp - Center Seatback - 2nd Row (5-Seat) (Remove and Replace).
- Install the 2nd row 20 lumbar bun. See Lumbar Bun - Center - 2nd Row (Remove and Replace).
- Install the 2nd row armrest. See Armrest - 2nd Row (5-Seat) (Remove and Replace).