Torque Specifications - Infotainment

Table 1. Torque Specifications: GNSS ANTENNA (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Screw that attaches the GNSS antenna to the bracket
0.8 Nm (7 lbs-in)
  • BALL TORX, HAND DRIVER, T10
  • Torx T10 bit
  • Digital Torque Screwdriver 0.10Nm - 2.0Nm
Reuse
Table 2. Torque Specifications: Speaker - Front Door (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Lower left bolt that attaches the front door speaker to the door
4.5 Nm (3.3 lbs-ft)
  • 8 mm socket
Reuse
Bolts (x3) that attach the front door speaker to the door
3.5 Nm (2.6 lbs-ft)
  • Torx T20 socket
Reuse
Table 3. Torque Specifications:
Description Torque Value Recommended Tools Reuse/Replace Notes
Screws (x3) that attach the 60mm full range speaker to the headliner
0.4 Nm (4 lbs-in)
  • Torx T10 bit
  • Digital Torque Screwdriver 0.10Nm - 2.0Nm
Reuse
Table 4. Torque Specifications: AUDIO SPEAKER TWEETER ACTIVE 25MM (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Screw that secures the blind spot indicator module assembly
1.5 Nm (1.1 lbs-ft)
  • Torx T20 bit
  • Digital Torque Screwdriver 0.10Nm - 2.0Nm
Reuse
Table 5. Torque Specifications: SUBWOOFER (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Bolts (x2) that attach the subwoofer assembly to the vehicle
8 Nm (5.9 lbs-ft)
  • Flex head ratchet/flex head torque wrench
  • 10 in extension
  • 10 mm deep socket
Reuse
Nyloc nut that attaches the subwoofer assembly to the vehicle
6 Nm (4.4 lbs-ft)
  • Flex head ratchet/flex head torque wrench
  • 10 in extension
  • 10 mm deep socket
Replace 1137563-00-A
Table 6. Torque Specifications: AUDIO AMPLIFIER (Remove and Install)
Description Torque Value Recommended Tools Reuse/Replace Notes
Bolt that attaches the audio amplifier to the body
6 Nm (4.4 lbs-ft)
  • 10 mm deep socket
Reuse
Table 7. Torque Specifications: NOISE FILTER- GND - ANTENNA (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Screw that attaches the 12V noise filter to the RH side of the liftgate
2 Nm (1.5 lbs-ft)
  • Torx T30 bit
  • Flex head ratchet/flex head torque wrench
  • Digital Torque Screwdriver 0.10Nm - 2.0Nm
Reuse/Replace The screw is self-contained to the filter.
Table 8. Torque Specifications: NOISE FILTER- +12V- FM - ANTENNA (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Screw that secures the 12V noise filter
2 Nm (1.5 lbs-ft)
  • Torx T30 bit
  • Cordless Ratchet/Impact Driver
Reuse The screw is self-contained to the filter.
Table 9. Torque Specifications: RADIO TUNER FM/DAB (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Bolts (x2) that attach the tuner to the body
8 Nm (5.9 lbs-ft)
  • 10 mm deep socket
Reuse
Table 10. Torque Specifications: ANTENNA-AMPLIFIER - FM/DAB (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Bolt that attaches the tuner to the body
4 Nm (2.9 lbs-ft)
  • 10 mm deep socket
Reuse
Table 11. Torque Specifications: Speaker - Instrument Panel - LH (Remove and Replace) / AUDIO SPEAKER FULL RANGE 100MM (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Instrument panel speaker screws
2.3 Nm (1.7 lbs-ft)
  • SET, 1/2" CUT BIT. (78 PCS DOUBLE END MINI RATCHET)
  • Wiha Torque Screwdriver 0.8-5 Nm screwdriver (installation only)
Reuse
Table 12. Torque Specifications: Touchscreen - Center Display Assembly (Remove and Install)
Description Torque Value Recommended Tools Reuse/Replace Notes
Patch bolts (x2) that attach the touchscreen to the instrumental panel carrier
16 Nm (11.8 lbs-ft)
  • Cordless Ratchet/Impact Driver
  • 4 in extension
  • 10 mm socket
  • Ratchet/torque wrench
Replace
Bolts (x2) that attach the housing neck to the touchscreen
3 Nm (2.2 lbs-ft)
  • Torx T30 socket
  • 10 in extension
  • Cordless Ratchet/Impact Driver
  • Ratchet/torque wrench
Reuse
Table 13. Torque Specifications: CAR COMPUTER - LEFT HAND DRIVE - AP4 (Remove and Install)
Description Torque Value Recommended Tools Reuse/Replace Notes
Bolts (x2) that attach the car computer to the bulkhead
15 Nm (11.1 lbs-ft)
  • Ratchet/torque wrench
  • 13 mm socket
Reuse
Bolt that attaches the ground strap to the car computer
4 Nm (2.9 lbs-ft)
  • Ratchet/torque wrench
  • Torx T25 socket
Replace 1813873-00-A
Nuts (x2) that attach the car computer to the bulkhead
15 Nm (11.1 lbs-ft)
  • Ratchet/torque wrench
  • 13 mm deep socket
Reuse
Table 14. Torque Specifications: Telematics Control Unit (TCU) (Remove and Install)
Description Torque Value Recommended Tools Reuse/Replace Notes
Bolts (x2) that attach the TCU to the body
14 Nm (10.3 lbs-ft)
  • 13 mm deep socket
Reuse