Dual Lock Pad - Liftgate - LH (Model YL) (Remove and Replace)
Correction code
12270100702
FRT
0.24
NOTE: Unless
otherwise explicitly stated in the procedure, the correction code and its
associated FRT reflect all of the work required to perform this procedure,
including the linked procedures. Do not stack correction
codes unless explicitly told to do so.
NOTE: See Flat Rate Times to
learn more about FRTs and how they are created.
NOTE: See Personal Protection to make
sure you are wearing proper PPE when performing the procedure below.
NOTE: See Ergonomic Precautions for safe and healthy
working practices.
Remove
- Remove the LH trough trim. See Trim - Trough - LH (Model YL) (Remove and Replace).
-
Remove the dual lock pad from the LH trough trim.
- Use glue cleaner and IPA wipes to clean off any remaining adhesive.
Install
-
Align the dual lock pad with the alignment lines on the LH trough trim, and then
install the pad to the LH trough trim.
- Install the LH trough trim. See Trim - Trough - LH (Model YL) (Remove and Replace).