2026-04-14

Glare Shield - Front Camera (Remove and Replace)

Correction code 1505010042 FRT 0.24 NOTE: Unless otherwise explicitly stated in the procedure, the correction code and FRT listed above reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. NOTE: See Personal Protection to make sure you are wearing proper PPE when performing the procedure below. NOTE: See Ergonomic Precautions for safe and healthy working practices.

  • 2026-04-14: Released new procedure.

Remove

  1. Remove the GPS/GNSS antenna from the bracket. See GNSS Antenna (Remove and Replace).
  2. Release the tabs (x2) and location pins (x2) that attach the glare shield to the windshield.

Install

  1. Align the location pins (x2), the secure the tabs (x2) that attach the glare shield to the windshield.
  2. Install the GPS/GNSS antenna to the bracket. See GNSS Antenna (Remove and Replace).