2025-12-25

Headlamp - RH (Remove and Replace)

Correction code 1740020702 FRT 0.96 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email ServiceManualFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure. NOTE: See Ergonomic Precautions for safe and healthy working practices.

Torque Specifications

Table 1. Torque Specifications: and
Description Torque Value Recommended Tools Reuse/Replace Notes
Bolts (x3) that attach the LH headlight to the body
3.5 Nm (2.6 lbs-ft)
  • 10 mm socket
Reuse

Remove

  1. Remove the RH headlamp from the vehicle. See Headlamp Assembly - RH (Remove and Install).
  2. Remove the harness clip from the RH headlamp.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    Handle the headlamp housing with caution to avoid damaging the bracket.