Instrument Panel - Passenger Footwell Duct (Remove and Replace)
Correction code
1405030202
FRT
0.18
NOTE: Unless
otherwise explicitly stated in the procedure, the above correction code and
FRT reflect all of the work required to perform this procedure, including
the linked procedures. Do
not stack correction codes unless explicitly told to do so.
NOTE: See Flat Rate Times to learn more about FRTs and how they are
created. To provide feedback on FRT values, email ServiceManualFeedback@tesla.com.
NOTE: See Personal Protection to make
sure wearing proper PPE when performing the below procedure.
Remove
- Remove the glove box. See Glove Box (Remove and Replace).
-
Remove the push clip that attaches the passenger footwell duct to the IP
carrier.
-
Remove the passenger footwell duct
from the HVAC module.
Install
-
Install the passenger footwell duct to
the HVAC module.
-
Install the push clip that attaches the passenger footwell duct to the IP
carrier.
- Install the glove box. See Glove Box (Remove and Replace).