2026-08-09

Headrest - 2nd Row - LH (Remove and Replace)

Correction code 1305011002 FRT 0.06 NOTE: Unless otherwise explicitly stated in the procedure, the correction code and its associated FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. NOTE: See Personal Protection to make sure you are wearing proper PPE when performing the procedure below. NOTE: See Ergonomic Precautions for safe and healthy working practices.

  • 2026-02-09: Added detailed instructions for how to release headrest.

Remove

  1. Open both LH doors.
  2. Move the driver seat fully forward.
  3. Fold the 2nd row 60 seatback down.
  4. Insert a pick into the guide opening while pressing the guide opening. Lift the headrest to remove it.
    Tip
    Use of the following tool(s) is recommended:
    • Pick Miniature Soft Grip, 90 degree tip, 6 in
    Figure 1. Guide opening location
    Figure 2. Pressing guide button while inserting pick into guide opening

Install

  1. Install the headrest onto the 60 seat assembly.
  2. Return the 2nd row 60 seatback to its original position.
  3. Close the LH rear door.
  4. Move the LH front seat to original position.
  5. Raise the LH front window and close LH front door.