2025-03-12

RADIO TUNER FM/DAB (Remove and Replace)

Correction code 2130010502 FRT 0.10 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.

Table 1. Torque Specifications: RADIO TUNER FM/DAB (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Bolts (x2) that attach the tuner to the body
8 Nm (5.9 lbs-ft)
  • 10 mm deep socket
Reuse

Remove

  1. Remove the liftgate upper trim. See LIFTGATE UPPER TRIM (Remove and Replace).
  2. Disconnect the electrical connectors (x3) from the tuner.
  3. Remove the bolts (x2) that attach the tuner to the body, and then remove the tuner from the vehicle.
    Informational PurposesAn informational icon, calling your attention
    TIp
    Use of the following tool(s) is recommended:
    • 10 mm deep socket

Install

  1. Position the tuner to the vehicle, and then install the bolts (x2) that attach the tuner to the body.
    8 Nm (5.9 lbs-ft)
    Informational PurposesAn informational icon, calling your attention
    TIp
    Use of the following tool(s) is recommended:
    • 10 mm deep socket
  2. Connect the electrical connectors (x3) to the tuner.
  3. Install the liftgate upper trim. See LIFTGATE UPPER TRIM (Remove and Replace).