Instrument Panel - Cowl Top Foam (Remove and Replace)
Correction code
1405020202
FRT
0.25
NOTE: Unless
otherwise explicitly stated in the procedure, the above correction code and
FRT reflect all of the work required to perform this procedure, including
the linked procedures. Do
not stack correction codes unless explicitly told to do so.
NOTE: See Flat Rate Times to learn more about FRTs and how they are
created. To provide feedback on FRT values, email ServiceManualFeedback@tesla.com.
NOTE: See Personal Protection to make
sure wearing proper PPE when performing the below procedure.
Remove
- Remove the LH and RH upper A-pillar trims. See Trim - A-Pillar - Upper - LH (Remove and Replace).
- Remove the wrap around assembly. See Speaker Grill - Instrument Panel (Remove and Install).
- Remove the cowl top foam from the vehicle.
Install
-
Install the cowl top foam to the vehicle.
NoteMake sure the foam is fully in place.
- Install the wrap around assembly. See Speaker Grill - Instrument Panel (Remove and Install).
- Install the LH and RH upper A-pillar trims. See Trim - A-Pillar - Upper - LH (Remove and Replace).