Seats - 2nd Row Seat Assemblies and Hardware - 2nd Row Seat Assemblies - 2nd Row Head Adjustment Guide - RH (RI)
Correction code
NEW
FRT 0.1
NOTE: Unless
otherwise explicitly stated in the procedure, the above correction code and
FRT reflect all of the work required to perform this procedure, including
the linked procedures. Do
not stack correction codes unless explicitly told to do so.
NOTE: See Flat Rate Times to learn more about FRTs and how they are
created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com.
NOTE: See Personal Protection to make
sure wearing proper PPE when performing the below procedure.
Remove
- Remove the RH backpanel from the 2nd row seat back. See SECOND ROW BACKPANEL - RIGHT HAND (Remove and Replace).
-
Release the tabs (x2) that attach the
RH outboard headrest guide lock, and then remove the RH outboard headrest guide lock
from seat.
Install
-
Install the tabs (x2) that attach the RH outboard headrest guide lock.
- Install the RH backpanel to the 2nd row seat back. See SECOND ROW BACKPANEL - RIGHT HAND (Remove and Replace).