REAR POWERTRAIN RETURN (Remove and Replace)
Correction code
1830021402
FRT
0.00
NOTE: Unless
otherwise explicitly stated in the procedure, the above correction code and
FRT reflect all of the work required to perform this procedure, including
the linked procedures. Do
not stack correction codes unless explicitly told to do so.
NOTE: See Flat Rate Times to learn more about FRTs and how they are
created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com.
NOTE: See Personal Protection to make
sure wearing proper PPE when performing the below procedure.
Remove
- Remove penthouse engagement seal from HV battery pack. See HV Battery System - HV Battery Assembly - Ancillary Bay Engagement Seal.
- Disconnect rear powertrain supply hose from rear of HV battery
- Remove powertrain supply tube from RH side of HV battery.
Install
- Install powertrain supply tube to RH side of HV battery.
- Connect rear powertrain supply hose to rear of HV battery
- Install penthouse engagement seal to HV battery pack. See HV Battery System - HV Battery Assembly - Ancillary Bay Engagement Seal.