Trunk Load Floor - Rear (Remove and Replace)
Correction code
1530051102
FRT
0.06
NOTE: Unless
otherwise explicitly stated in the procedure, the correction code and its
associated FRT reflect all of the work required to perform this procedure,
including the linked procedures. Do not stack correction
codes unless explicitly told to do so.
NOTE: See Flat Rate Times to
learn more about FRTs and how they are created.
NOTE: See Personal Protection to make
sure you are wearing proper PPE when performing the procedure below.
NOTE: See Ergonomic Precautions for safe and healthy
working practices.
Remove
- Open the rear trunk.
-
Lift up the trunk floor trim
and remove it from the vehicle.
TipUse the pull tab located at the rear edge of the trunk floor trim.
Install
-
Install the trunk floor to the vehicle.
- Close the rear trunk.