2026-08-09

B-Cover - Outer - Center Seatbelt - 3rd Row Seat (7-Seat) (Remove and Install)

Correction code 1309010201 FRT 0.12 NOTE: Unless otherwise explicitly stated in the procedure, the correction code and its associated FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. NOTE: See Personal Protection to make sure you are wearing proper PPE when performing the procedure below. NOTE: See Ergonomic Precautions for safe and healthy working practices.

  • 2026-01-27: Released new procedure.

Remove

  1. Remove the 3rd row seat cushion. See Seat Cushion - 3rd Row (7-Seat) (Remove and Replace).
  2. Open the liftgate.
  3. Use a 90-degree pick tool to disengage the tabs (x4), lift the 3rd row center outer B-cover to release the clips (x2), then remove it from the inner assembly.

Install

  1. Insert the seatbelt assembly into the B-cover, engage the tabs (x4) and clips (x2) that attach the center outer B-cover to the inner assembly.
    Note
    Check for proper alignment after installation.
  2. Close the liftgate.
  3. Install the 3rd row seat cushion. See Seat Cushion - 3rd Row (7-Seat) (Remove and Replace).