2025-03-12
Instrument Panel - Noise Vibration Harness Pad - Passenger (Remove and Replace)
Correction code
1405011602
FRT
1.50
NOTE: Unless otherwise explicitly stated in the procedure, the correction code and FRT listed above reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so.
NOTE: See Flat Rate Times to learn more about FRTs and how they are created.
NOTE: See Personal Protection to make sure you
are wearing proper PPE when performing the procedure below.
NOTE: See Ergonomic Precautions for safe and healthy working practices.
Remove
- Remove the instrument panel upper carrier from vehicle. See Assembly - Instrument Panel - Upper (Remove and Replace).
-
Remove instrument panel noise
vibration pad from instrument panel passenger side.
Install
-
Install instrument panel noise
vibration pad onto instrument panel passenger side.
- Install the instrument panel upper carrier to vehicle. See Assembly - Instrument Panel - Upper (Remove and Replace).