2025-03-12

A Pillar Applique - Exterior Mirror - LH (Remove and Replace)

Correction code 1209010102 FRT 0.25 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.

Remove

  1. Remove the LH front exterior mirror assembly. See Exterior Mirror - LH (Remove and Replace).
    Informational PurposesAn informational icon, calling your attention
    Note
    It is not necessary to separate the LH door mirror glass and skull cap from the LH front exterior mirror assembly.
  2. Release the tabs (x3) that attach the LH front exterior mirror A-pillar applique to the LH front exterior mirror assembly, and then remove the applique from the mirror.

Install

  1. Position the LH front exterior A-pillar applique on the LH front exterior mirror assembly, and then install the tabs (x3) that attach the applique to the mirror.
  2. Install the LH front exterior mirror assembly. See Exterior Mirror - LH (Remove and Replace).