2026-03-03

Switch - Window - Rear - LH (Remove and Replace)

Correction code 1513020071, 1513020072 FRT 0.12 NOTE: Unless otherwise explicitly stated in the procedure, the correction code and FRT listed above reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. NOTE: See Personal Protection to make sure you are wearing proper PPE when performing the procedure below. NOTE: See Ergonomic Precautions for safe and healthy working practices.

  • 2026-03-03: Released new procedure.

Remove

  1. Remove the LH rear door bolt cover. See Bolt Cover - Door Trim - Rear - LH (Remove and Replace).
  2. Use the straight pick to release the tabs (x3) that attach the LH rear window switch to the door panel, then pull the switch out from the bottom.
  3. Disconnect the LH rear window switch connector, then remove the switch.

Install

  1. Secure the tabs (x3) that attach the LH rear window switch to the door panel.
    Informational PurposesAn informational icon, calling your attention
    Note
    An audible click is heard once the switch is properly installed.
  2. Connect the LH rear window switch connector.
  3. Install the LH rear door bolt cover. See Bolt Cover - Door Trim - Rear - LH (Remove and Replace).