Seats - 2nd Row Seat Assemblies and Hardware - 2nd Row Seat Back Hardware - Second Row Center Actuator Cable (Remove and Replace)
Correction code
1305030802
FRT 0.3
NOTE: Unless
otherwise explicitly stated in the procedure, the above correction code and
FRT reflect all of the work required to perform this procedure, including
the linked procedures. Do
not stack correction codes unless explicitly told to do so.
NOTE: See Flat Rate Times to learn more about FRTs and how they are
created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com.
NOTE: See Personal Protection to make
sure wearing proper PPE when performing the below procedure.
Remove
- Remove the seat shoulder switch form the RH seatback seat frame. See Seat Fold Shoulder Switch - Center (Remove and Replace).
-
Release 20 latch actuator cable from
latch.
-
Release 20 latch actuator cable from
20 seatback frame.
Install
-
Secure 20 latch actuator cable to 20 seatback frame.
-
Secure 20 latch actuator cable to latch.
- Install the seat shoulder switch to the RH seatback seat frame. See Seat Fold Shoulder Switch - Center (Remove and Replace).