Correction code
1302010901
1302010902
NOTE: Unless
otherwise explicitly stated in the procedure, the correction code and its
associated FRT reflect all of the work required to perform this procedure,
including the linked procedures. Do not stack correction
codes unless explicitly told to do so.
NOTE: See Flat Rate Times to
learn more about FRTs and how they are created.
NOTE: See Personal Protection to make
sure you are wearing proper PPE when performing the procedure below.
NOTE: See Ergonomic Precautions for safe and healthy
working practices.
Remove
- Remove the 2nd row RH seat inner track. See Track - Inner - 2nd Row Seat - RH (7-Seat) (Remove and Replace).
-
Remove the towel bar from the 2nd row
RH seat inner seat track.
NoteLift the towel bar upwards to remove it from the inner track.
Install
-
Install the towel bar into the 2nd row
RH seat inner seat track.
NoteInstall the spring and the towel bar into the seat track. Rotate the towel bar until it is properly placed inside the holding tabs.
- Install the 2nd row RH seat inner track. See Track - Inner - 2nd Row Seat - RH (7-Seat) (Remove and Replace).