2026-02-27

Correction code 1518012701 1518012702 NOTE: Unless otherwise explicitly stated in the procedure, the correction code and FRT listed above reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. NOTE: See Personal Protection to make sure you are wearing proper PPE when performing the procedure below. NOTE: See Ergonomic Precautions for safe and healthy working practices.

Remove

  1. Open all doors and lower all windows.
  2. Move the LH front seat forward.
  3. Move the 2nd row LH seat to easy entry position.
    Informational PurposesAn informational icon, calling your attention
    Note
    Press the shoulder switch then push the seat forward.
  4. Remove the LH lower C-pillar trim (4x tabs, 3x clips).
    Informational PurposesAn informational icon, calling your attention
    Note
    Release the door seal as needed.

Install

  1. Install the LH lower C-pillar trim (4x tabs, 3x clips).
    Informational PurposesAn informational icon, calling your attention
    Note
    Secure the door seal if released.
  2. Move the 2nd row LH seat to original position.
  3. Move the LH front seat to original position.
  4. Raise all windows and close all doors.