2026-04-20

Correction code 1309010701 1309010702 FRT NOTE: Unless otherwise explicitly stated in the procedure, the correction code and FRT listed above reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. NOTE: See Personal Protection to make sure you are wearing proper PPE when performing the procedure below. NOTE: See Ergonomic Precautions for safe and healthy working practices.

  • 2026-01-26: Released new procedure.

Remove

  1. Remove the LH 3rd row seat cushion bolster. See GUID-ED915A40-010C-4826-8D6D-849C92344E94.html.
  2. Remove the trunk load floor from the vehicle.
  3. Pry from front to rear to release the tab and clip that attach the outer B-cover to the seat, then push from rear to detach from the inner cover.
    Informational PurposesAn informational icon, calling your attention
    Note
    Slightly recline the seat forward for rear clip access.

Install

  1. Insert the outer B-cover into position, and engage the rear clip first then the front tab to secure the outer cover to the seat.
  2. Install the trunk load floor onto the vehicle.
  3. Install the LH 3rd row seat cushion bolster. See GUID-ED915A40-010C-4826-8D6D-849C92344E94.html.